PID-Temperature Controllers

Selec TC544/TC244/TC344 - PID Temperature Controllers

The Selec TC544 / TC244 / TC344 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.

Features

• High Performance
• Dual Display, 4 digit, 7 segment LED
• LED Status Indicator: Relay ON, Tune, Soak
• 3 Front Panel Control buttons
• TC / RTD Input
• PID, ON/OFF Control
• Two Setpoints
• ^oC / ^oF Selectable
• Control Output : Relay or SSR Drive
• Alarm Output : Relay or SSR Drive
• Easy to use

Selec TC533/TC233/TC333 - PID Temperature Controllers

The Selec TC533 / TC233 / TC333 is a sophisticated autotuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs.Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.

Features

• High Performance
• Dual Display, 3 digit, 7 segment LED
• LED Status Indicator: Relay ON
• 3 Front Panel Control buttons
• TC/RTD Inputs
• PID, ON/OFF Control
• Single Setpoint
• ^oC / ^oF Selectable
• Control Output : Relay or SSR Drive
• Easy to use

Selec TC513/TC203/TC303 - PID Temperature Controllers

The Selec TC513 / TC203 / TC303 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC

Features

• High Performance
• Single Display, 3 digit, 7 segment LED
• LED Status Indicator: Relay ON
• 3 Front Panel Control buttons
• TC / RTD Inputs
• PID, ON/OFF Control
• Single Setpoint
• ^oC / ^oF Selectable
• Control Output : Relay or SSR Drive
• Easy to use

Selec PID500 - Full Featured PID Temperature Controllers

The Selec PID500 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 3 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) and 1 alarm output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270VAC.

Features

• Input
  • Thermocouple: J, K, T, R, S, C, N, E, L, U, W, | B, Platinel II
  • RTD (2 wire / 3 wire): PT100
  • Linear mV: -5 to 56 mV
  • Current: 0 / 4 to 20 mA
  • Voltage: 0 to 10V DC
• Max 3 output
• Output 2 programmable as Heat / Cool / Alarm
• Output 3 programmable as an alarm
• Selectable lower display option
• Selectable temperature unit - ^°C / ^°F
• Auto / Manual mode
• 4 -Zone PID
• Heat - Cool PID algorithm
• Ramp - Soak
• Soft Start
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)

Optional

• 18V DC output to drive SSR
• Linear DC outputs (0 to 10 V, 0 to 20mA, 4 to 20 mA)
• Heater Current Monitor and Heater Break Alarm
• Remote set point input (4 to 20 mA / 0 to 10V)
• Motorized input (with position feedback)
• RS485 communication
• Retransmission output

Selec PID110/PID330 - Full Featured PID Temperature Controllers

The Selec PID110 / PID330 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 3 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) and 1 alarm output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270VAC.

Features

• Input
  • Thermocouple: J, K, T, R, S, C, N, E, L, U, W,
  • B, Platinel II
  • RTD (2 wire / 3 wire): PT100
  • Linear mV: -5 to 56mV
  • Current: 0 to 20 mA
  • Voltage: 0 to 10V DC
• Max 3 output
• Output 2 programmable as Heat / Cool / Alarm
• Output 3 programmable as an alarm
• Selectable lower display option
• Auto / Manual mode
• 4- Zone PID
• Heat - Cool PID algorithm
• Ramp - Soak
• Soft Start (set point ramping for process startup)
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)
• Program security

Optional

• 18V DC output to drive SSR
• Linear DC Outputs (0 to 10V, 0 to 20mA, 4 to 20mA)
• For special functions like Heater current monitoring,
• Remote setpoint etc., consult factory

Selec PID528 - Full Featured PID Temperature Controllers

The Selec PID 528 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 2 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270Vac.

Features

• High Performance
• ON-OFF, PID, PID AUTOTUNE
• Sensor Inputs:-
  • TC : J, K, T, R, S
  • RTD : PT100
• Two setpoints
• Output: Relay / SSR / Current
• Set point lock
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)

Optional

• 18V DC output to drive SSR
• Current output of 4-20mA DC

Selec TC518 - Single Set Point Low Cost PID Temperature Controllers

The Selec TC518 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC

Features

• Sensor inputs -
• TC:- J, K, T, R, S
• RTD:- PT100
• Single setpoint
• Autotuning
• Selectable temperature unit - ^°C / ^°F
• Set point lock
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)

Selec PR502 - PID Profile Temperature Controllers

The Selec PR502 Profile controller are advanced, 4 digit auto-tuning controllers with up to 2 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) and 1 alarm output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270VAC.

Features

• 10 programs each of 16 steps
• Input-
  • Thermocouple: J, K, T, R, S, C, N, E, L, U, W, B,
  • Platinel II
  • RTD (2 wire or 3 wire): PT100
  • Linear mV: -5 to 56mV
  • Current: 0 / 4 to 20 mA
  • Voltage: 0 to 10V DC
• Max 2 output
• Output 2 programmable as Heat / Cool / Alarm
• PID Control
• Auto / Manual mode
• Auto ramping and Deviation hold feature
• Memory retention on power failure
• Heat - Cool PID Algorithm
• Soft Start (Set point Ramping for Process Startup)
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)
• Program security

Optional

• 18V DC output to drive SSR
• Linear DC outputs (0 to 10V, 0 to 20mA, 4 to 20mA)
• Heater Current Monitor and Heater Break Alarm
• Remote Set point input (4 to 20mA)
• RS485 communication

Selec CH403 - 3 Digit PID Cooling Controllers

The Selec CH403 Cooling controllers are designed for management of refrigeration and food processing applications. The controllers have 1 NTC inputs for ambient and defrost temperatures and 2 relay outputs for control purposes. The controllers feature a simple user interface and are housed in a compact panel mounting enclosure. The CH403 controllers are powered from 85 to 270Vac/dc.

Features

• 3 Digit 7 segment LED
• Compact size
• Selectable temperature unit - ^°C & ^°F
• NTC sensor input
• Programmable High and Low alarms
• Restart time delay
• Setpoint lock
• Time based defrost management
• Selectable hysteresis
• Programmable display offset
• Selectable relay action - Heat / Cool
• 85 to 270V AC/DC supply voltage (24V AC/DC optional)